Davis-Bacon rates — Dundy County, Nebraska

Every active general wage determination covering this county, one section per construction type. These rates are the minimum that must be paid on a federal or federally assisted contract.

Pick the construction type that matches your contract, not the highest rate. Building, Residential, Highway and Heavy are separate determinations with different rates, and using the wrong one is a common reason a certified payroll comes back rejected. Where your trade appears under several classifications the choice between them is a judgement call — the plainest match is usually right, and the contracting officer can confirm it.

Building

NE20260082 rev 1 · 05/18/2026 · 21 classifications

Classification	Base rate	Fringe	Total
BOILERMAKER	48.48	33.57	82.05
ELECTRICIAN ZONE 4: 76 MILES AND OVER FROM THE MAIN POST OFFICE IN LINCOLN	36.00	18.99	54.99
ELECTRICIAN ZONE 3: 51 TO 75 MILES FROM THE MAIN POST OFFICE IN LINCOLN	35.60	18.94	54.54
ELECTRICIAN ZONE 2: 36 TO 50 MILES FROM THE MAIN POST OFFICE IN LINCOLN	35.30	18.91	54.21
ELECTRICIAN ZONE 1: 0 TO 35 MILES FROM THE MAIN POST OFFICE IN LINCOLN	35.00	18.88	53.88
IRONWORKER, STRUCTURAL (DUNDY COUNTY)	39.00	22.30	61.30
IRONWORKER, STRUCTURAL (CHEYENNE COUNTY)	33.68	27.10	60.78
LABORER (MASON TENDER, BRICK & HOD)	24.00	13.48	37.48
PLUMBER (DUNDY COUNTY)	44.26	16.90	61.16
PLUMBER (CHEYENNE COUNTY)	34.88	22.40	57.28
PIPEFITTER (CHEYENNE COUNTY)	34.88	22.40	57.28
PIPEFITTER (DUNDY COUNTY)	46.25	21.10	67.35
SHEET METAL WORKER (INCLUDES HVAC DUCT INSTALLATION)	24.34	16.06	40.40
TRUCK DRIVER: DUMP, LOWBOY AND TANDEM	14.56	1.68	16.24
ROOFER	14.27	0.65	14.92
OPERATOR: LOADER	16.58	0.94	17.52
OPERATOR: BACKHOE/EXCAVATOR/TRACKHOE	20.24	2.84	23.08
LABORER: COMMON OR GENERAL	10.24	—	10.24
CEMENT MASON/CONCRETE FINISHER	17.52	1.31	18.83
CARPENTER	16.42	1.95	18.37
BRICKLAYER	25.00	10.75	35.75

Residential

NE20260012 rev 1 · 05/18/2026 · 20 classifications

Classification	Base rate	Fringe	Total
TRUCK DRIVER	7.25	—	7.25
TILE SETTER	8.00	—	8.00
STEEL ERECTOR	7.25	—	7.25
SHEET METAL WORKER	8.50	—	8.50
ROOFER	8.00	—	8.00
POWER EQUIPMENT OPERATORS: MOTOR GRADER	7.25	—	7.25
POWER EQUIPMENT OPERATORS: (CRANE OPERATOR)	7.25	—	7.25
POWER EQUIPMENT OPERATORS: (BACKHOE OPERATOR)	7.25	—	7.25
PLUMBER/PIPEFITTER	7.89	—	7.89
PAINTER	7.25	—	7.25
LABORERS: (GENERAL LABORER)	7.25	—	7.25
LABORERS: (CONCRETE LABORER)	7.25	—	7.25
INSULATOR	7.25	—	7.25
GLAZIER	9.90	—	9.90
ELECTRICIAN	7.25	—	7.25
DRYWALL: (INSTALLER & HANGER)	7.25	—	7.25
DRYWALL: (FINISHER & TAPER)	7.25	—	7.25
CEMENT MASON/CONCRETE FINISHER	7.25	—	7.25
CARPENTER	8.63	—	8.63
BRICKLAYER, STONEMASON	10.00	—	10.00

Heavy

NE20260048 rev 1 · 05/18/2026 · 13 classifications

Classification	Base rate	Fringe	Total
ELECTRICIAN ZONE 4: 76 MILES AND OVER FROM THE MAIN POST OFFICE IN LINCOLN FOOTNOTE: WORK ON SCAFFOLDS, HANGING SCAFFOLDS, BOATSWAINS CHAIRS OR LADDERS, ETC., IN ANY AREA WHERE THE WORKER IS IN A POSITION TO FALL 40 FT. OR MORE, OR WHERE OBJECTS ABOVE THE WORKER CAN FALL 40 FT. OR MORE: TO BE PAID ONE AND ONE-HALF TIMES THE STRAIGHT- TIME RATE OF PAY	36.00	18.99	54.99
ELECTRICIAN ZONE 3: 51 TO 75 MILES FROM THE MAIN POST OFFICE IN LINCOLN FOOTNOTE: WORK ON SCAFFOLDS, HANGING SCAFFOLDS, BOATSWAINS CHAIRS OR LADDERS, ETC., IN ANY AREA WHERE THE WORKER IS IN A POSITION TO FALL 40 FT. OR MORE, OR WHERE OBJECTS ABOVE THE WORKER CAN FALL 40 FT. OR MORE: TO BE PAID ONE AND ONE-HALF TIMES THE STRAIGHT- TIME RATE OF PAY	35.60	18.94	54.54
ELECTRICIAN ZONE 2: 36 TO 50 MILES FROM THE MAIN POST OFFICE IN LINCOLN FOOTNOTE: WORK ON SCAFFOLDS, HANGING SCAFFOLDS, BOATSWAINS CHAIRS OR LADDERS, ETC., IN ANY AREA WHERE THE WORKER IS IN A POSITION TO FALL 40 FT. OR MORE, OR WHERE OBJECTS ABOVE THE WORKER CAN FALL 40 FT. OR MORE: TO BE PAID ONE AND ONE-HALF TIMES THE STRAIGHT- TIME RATE OF PAY	35.30	18.91	54.21
ELECTRICIAN ZONE 1: 0 TO 35 MILES FROM THE MAIN POST OFFICE IN LINCOLN FOOTNOTE: WORK ON SCAFFOLDS, HANGING SCAFFOLDS, BOATSWAINS CHAIRS OR LADDERS, ETC., IN ANY AREA WHERE THE WORKER IS IN A POSITION TO FALL 40 FT. OR MORE, OR WHERE OBJECTS ABOVE THE WORKER CAN FALL 40 FT. OR MORE: TO BE PAID ONE AND ONE-HALF TIMES THE STRAIGHT- TIME RATE OF PAY	35.00	18.88	53.88
OPERATOR: SCRAPER	14.89	2.06	16.95
OPERATOR: LOADER	15.68	0.92	16.60
OPERATOR: BULLDOZER	15.95	3.04	18.99
OPERATOR: BOBCAT/SKID STEER/SKID LOADER	25.00	4.73	29.73
OPERATOR: BACKHOE/EXCAVATOR/TRACKHOE	19.74	2.32	22.06
LABORER: PIPELAYER	17.11	1.34	18.45
LABORER: COMMON OR GENERAL	16.82	2.79	19.61
CEMENT MASON/CONCRETE FINISHER	19.26	3.39	22.65
CARPENTER	23.58	2.48	26.06

Filing the WH-347 that these rates feed into? I build certified payroll tools, and I will prepare your first weekly filing from your payroll register free, with worker names removed — partly to be useful, partly because real registers are the only way to test the thing properly. hamza.aiemployee@gmail.com. No sign-up on this site, and nothing here is tracked.